How to Activate Water
& The Ceramic Egg Vase

Can dying bodies of water and especially the “dead” drinking water supplies be restored to living spring water freshness?

Man can restore water to its original Primordial condition. The water activation process duplicates how water has been and is transformed by natural conditions in the environment. Water’s capabilities help to create the needed conditions for it to rejuvenate itself.

Good quality, unpolluted water is the essential first step in the production of high quality living water. Filtered water.

The Conditions Needed to Restore Water

A. The Adding of TeraVite’s Active Ionic will introduce:

B. The Storing & Incubation of Water:

The egg shape has no corners and crevices to permit the stagnation of energy in water, thus the life forces of water in an egg-shaped vase will continue to accelerate and mature if proper conditions are sustained. Thus the egg vase will help incubate all liquids and keep them healthy, fresh and cool.

The egg-shaped water vase causes different water temperatures and they draw the coldest, heaviest water down through the center of the egg. Here centripetal forces cause the coldest, heaviest core-water to accelerate and pull the other specifically lighter water after it.

Most storage containers commonly in use today are either cubic or rectangular shaped. While these shapes are most easily and economically produced by today’s technology, they do impede natural water’s circulation and promote suffocation.

Nothing natural and alive can ever maintain its quality in sealed vessels because all natural systems are open and must be able to interact with the environment. They all need to be able to breathe; water is no exception. But, because of our rather superficial understanding of life, we do not readily credit natural processes with capacities of autonomy, consciousness, self-organizational ability or intelligence.

In today‘s industrial world, practicality (cost) dictates the mass production of cylindrical and rectangular plastic containers. Due to their rectangular shape and/or right-angled corners, stagnant zones are created which can provide a suitable environment for the propagation of pathogenic bacteria. Moreover, since the materials used are generally galvanized iron, fiberglass, concrete, steel, etc., i.e. all impervious materials, the contained water is unable to breathe and suffocates as a result. In this debilitated state water quickly becomes diseased and will require further disinfecting.

Another important storage and activation factor is the temperature within the container itself. Water must always be insulated so that it can maintain its cool temperature. The materials most suited to this are natural stone, timber and clay. Perhaps more than any other material, clay has been used for this purpose for millennia. Clay has a porosity that will allow water to breathe and is particularly well suited for water storage because it enables a very small percentage of the contained water to evaporate through the vessel walls.

Evaporation always causes cooling and, according to Schauberger, the porosity is correct when, for every 600th part of the contents evaporated, it will be cooled by 1 degree C (1.8 degree F). Therefore, when such a vessel (Egg) is positioned where there is reasonable air movement and shade or darkness, the water will cool and approach its anomaly point, its state of highest health at a temperature of +4 degrees C (39.2 degrees F).

Point of Anomaly

Life is founded on the delicate balance between heat and its inseparable counterpart cold, specific to the organism in question.

The point of anomaly is that point between two extreme limits of temperature at which the state of that substance is at its highest quality. Gases, liquids and solids (different states of substances) have anomaly points; each element in those various states has its own unique anomaly point.

Water loses its vitality either above or below a certain temperature range and this temperature is quite cool. Water exhibits its greatest vitality and has its greatest absorption ability at +4 degrees C (39.2 degrees F) . This is why such water is found in the forests.

We must treat water just as it is demonstrated to us by Nature. Warm water becomes dead and stagnant which is why it should be protected from sunlight and kept in the dark, far removed from all sources of heat, light and atmospheric influences.

Changes in temperature and density that occur within water must remain within its metabolic range for health and life. Beyond a certain range of conditions water will change to a different state. Organic liquids such as blood, saps of plants and water have anomaly points at which they can maintain their maximum health and exhibit the most energy which manifest within the limits of their metabolic range. For instance, human blood's anomaly point is 98.6 degrees F. Water’s anomaly point is +4 degrees C (39.2 degrees F).

Schauberger tells us of temperature changes in water, both positive and negative. By positive temperature change he meant the temperature movement of water. When frozen water melts and the temperature moves to +4 degrees C (39.2 degrees F), it is a positive temperature change. This means water becomes more laminar (layered) with a greater inner tension and well formed "indifferent zones” between layers. It becomes denser, will absorb more nutrients, holds more electrical potential, selectively regulates the type of bacteria within and transmits more energy.

Even Hippocrates wrote:

"Hot drinks weaken the flesh, afflict the nerves, undermine health, and waste blood".

What is best is pure, fresh, cool water.

Vibrational Healing

The re-creation of the natural earth process will enable every household to have the opportunity to produce living spring water right at home.

Water is much more effective when you or your loved ones participate in the process of activating water. One can thus unite with water in a more subtle, indeed, a spiritual way. Your participation in the activation of water is a very special drama that cannot be duplicated by machines.